Skip to content

SC-401 · Domain 2: Implement data loss prevention and retention · 33% of the exam

Task 2.1: Create and configure data loss prevention policies

Designing DLP policies from requirements, DLP roles, creating and managing policies, Adaptive Protection conditions, policy and rule precedence, and Defender for Cloud Apps file policies that use DLP.

Study it

  • Designing DLP policies: locations, conditions, actions and roles

    Partly covered by: Finding and Masking PII

  • Rule precedence, Adaptive Protection and Defender for Cloud Apps file policies

    Lesson coming

Sample questions

Try each one before opening the answer. Every option is explained, with the Microsoft documentation page that proves it.

Question 1 · choose 1

A DLP policy for SharePoint and OneDrive has two rules that notify users. Rule A: content contains the Contract number SIT. Rule B, built with nested groups: file extension is zip or 7z, AND NOT (document name contains draft). People editing matching files in Word for Windows see a policy tip for Rule A matches but never for Rule B matches, although activity explorer shows Rule B matches. What explains this?

  1. ARule B's NOT group replaced its exceptions, and rules that use exceptions don't show policy tips
  2. BPolicy tips appear only for rules that block an activity, and both rules only notify
  3. CRule B uses more than one operator without a group, so the rule builder ignores it
  4. DWith complex conditions, Office desktop apps show tips only for rules that use the Content contains sensitive information condition
Show the answer and why
  • ARule B's NOT group replaced its exceptions, and rules that use exceptions don't show policy tips

    Incorrect

    NOT conditions in nested groups replace exceptions; nothing removes policy tips from such rules.

  • BPolicy tips appear only for rules that block an activity, and both rules only notify

    Incorrect

    Rule A only notifies too and its tip appears, so notification-only rules show tips.

  • CRule B uses more than one operator without a group, so the rule builder ignores it

    Incorrect

    Rule B is built with groups and its matches are recorded, so the rule is evaluated.

  • DWith complex conditions, Office desktop apps show tips only for rules that use the Content contains sensitive information condition

    Correct

    When an action in Office desktop apps matches a policy with complex conditions, users see tips only for rules with that condition.

The DLP rule builder supports AND, OR and NOT with nested groups; you need groups to use multiple operators, and NOT conditions in a nested group replace exceptions. When an action in Word, Excel, PowerPoint or Outlook desktop matches a policy that uses complex conditions, the user sees policy tips only for rules that use the Content contains sensitive information condition.

Question 2 · choose 1

You're building a custom role group for a DLP analyst. She must open the DLP alert management dashboard in the Microsoft Purview portal, but she must not be able to create or change DLP policies. Which roles should the role group contain?

  1. AManage alerts only
  2. BManage alerts and View-Only DLP Compliance Management
  3. CView-Only DLP Compliance Management only
  4. DManage alerts together with DLP Compliance Management
Show the answer and why
  • AManage alerts only

    Incorrect

    The dashboard also needs DLP Compliance Management or View-Only DLP Compliance Management.

  • BManage alerts and View-Only DLP Compliance Management

    Correct

    The dashboard needs Manage alerts plus one of the two DLP compliance management roles; the view-only one can't change policies.

  • CView-Only DLP Compliance Management only

    Incorrect

    Without the Manage alerts role she can't open the dashboard.

  • DManage alerts together with DLP Compliance Management

    Incorrect

    DLP Compliance Management also lets her manage DLP policies.

To access the DLP alert management dashboard, a user needs the Manage alerts role and either DLP Compliance Management or View-Only DLP Compliance Management. The view-only role gives the dashboard access without the right to manage policies.

Question 3 · choose 1

An admin runs Test-DlpPolicies against a Word file in a SharePoint site and sends the report to herself. Four policies would match the file's content. Which policy can appear in the report?

  1. AA policy scoped to SharePoint and OneDrive that uses one simple condition
  2. BA policy scoped to Exchange and Teams with the same simple condition
  3. CA policy scoped to SharePoint whose conditions are grouped and nested
  4. DA policy scoped to Devices that matches the same file synced to a laptop
Show the answer and why
  • AA policy scoped to SharePoint and OneDrive that uses one simple condition

    Correct

    The cmdlet reports policies scoped to SharePoint alone, OneDrive alone or both, with simple conditions.

  • BA policy scoped to Exchange and Teams with the same simple condition

    Incorrect

    The cmdlet reports results only for policies that include SharePoint, OneDrive or both in their scope.

  • CA policy scoped to SharePoint whose conditions are grouped and nested

    Incorrect

    The cmdlet works only with simple conditions, not with complex, grouped or nested ones.

  • DA policy scoped to Devices that matches the same file synced to a laptop

    Incorrect

    The cmdlet only works for items in SharePoint or OneDrive and policies scoped to them.

Test-DlpPolicies shows which DLP policies match an individual item in SharePoint or OneDrive. It reports only on policies scoped to SharePoint alone, OneDrive alone or both, and it works only with simple conditions, not with complex, grouped or nested conditions.

Question 4 · choose 1

Adaptive Protection is configured in Insider Risk Management. An admin creates a DLP policy for the SharePoint and OneDrive locations and wants a rule that uses each user's insider risk level, but the condition isn't offered. A colleague's policy for Exchange shows it. What explains this?

  1. AThe condition appears only after the quick setup has created its own policies
  2. BThe condition is offered only for policies scoped to Exchange, Devices and Teams
  3. CThe admin needs the View-Only DLP Compliance Management role
  4. DThe condition is offered only in policies that run in simulation mode
Show the answer and why
  • AThe condition appears only after the quick setup has created its own policies

    Incorrect

    Policies can be configured manually with the condition; quick setup is one option, not a prerequisite.

  • BThe condition is offered only for policies scoped to Exchange, Devices and Teams

    Correct

    The insider risk level condition is available for rules in policies scoped to Exchange Online, Devices and Teams.

  • CThe admin needs the View-Only DLP Compliance Management role

    Incorrect

    A view-only role doesn't add conditions; the colleague sees it because of the location.

  • DThe condition is offered only in policies that run in simulation mode

    Incorrect

    The condition depends on the policy's locations, not on its state.

Once Adaptive Protection is configured, the Insider risk level for Adaptive Protection is condition is available in rules of policies scoped to the Exchange Online, Devices and Teams locations. You can configure such policies manually or let the quick setup create them.

Question 5 · choose 1

An Exchange DLP policy has four rules, created in this order and never reordered: Notify-Finance (policy tip only), Block-External (blocks the message, tip T2), Block-Partners (blocks the message, tip T3) and Report-Only (incident report only). A user's message matches all four rules. Which policy tip does the user see?

  1. AThe tip from Notify-Finance
  2. BThe tip T3 from Block-Partners
  3. CBoth T2 and T3, one after the other
  4. DThe tip T2 from Block-External
Show the answer and why
  • AThe tip from Notify-Finance

    Incorrect

    Only the tip from the most restrictive rule with the highest priority is shown; a notify-only rule isn't the most restrictive.

  • BThe tip T3 from Block-Partners

    Incorrect

    Block-Partners has the same action as Block-External but was created later, so it has a lower priority.

  • CBoth T2 and T3, one after the other

    Incorrect

    Only one tip is shown, so users don't see a cascade of policy tips.

  • DThe tip T2 from Block-External

    Correct

    Block-External is the most restrictive rule with the highest priority, because rule priority follows creation order.

For hosted locations such as Exchange, each rule gets a priority in the order it's created, so the rule created first has the first priority. When content matches several rules, only the policy tip from the most restrictive rule that has the highest priority is shown, which prevents a cascade of policy tips.

Question 6 · choose 2

Policy Payment cards runs in simulation mode with policy tips off, for SharePoint and Exchange. Rule 1 (first priority) matches ten or more card numbers, blocks access and has Stop processing more rules turned on. Rule 2 matches any card number and notifies. Which two statements describe the simulation results? (Choose TWO.)

  1. ARule 2 matches are recorded for files that also matched Rule 1
  2. BUsers who share files with ten or more card numbers are blocked
  3. CSharePoint files that existed before the simulation started are evaluated
  4. DExchange messages sent before the simulation started are evaluated
  5. EUsers see Rule 2's policy tip while the simulation runs
Show the answer and why
  • ARule 2 matches are recorded for files that also matched Rule 1

    Correct

    Stop processing more rules doesn't work in simulation mode, even when it's turned on.

  • BUsers who share files with ten or more card numbers are blocked

    Incorrect

    Actions in a policy aren't applied while it's in simulation mode.

  • CSharePoint files that existed before the simulation started are evaluated

    Correct

    For SharePoint and OneDrive, existing and new or changed items are evaluated.

  • DExchange messages sent before the simulation started are evaluated

    Incorrect

    For Exchange, only items that are new during the simulation are evaluated.

  • EUsers see Rule 2's policy tip while the simulation runs

    Incorrect

    The policy runs in simulation without policy tips, so no tips are shown.

A policy in simulation mode runs as if it were enforced, without enforcement. Stop processing more rules doesn't work in simulation mode. For SharePoint and OneDrive all existing and new or changed items are evaluated; for Exchange, Teams and devices only items that are new during the simulation.

Question 7 · choose 1

Before configuring a new DLP policy, the compliance lead wants one sentence that sums up the business purpose: what to protect, where, under which conditions and with which actions. What does Microsoft's design guidance call this sentence?

  1. AA policy template
  2. BA policy intent statement
  3. CA rule condition
  4. DA simulation summary
Show the answer and why
  • AA policy template

    Incorrect

    A template, such as the HIPAA template, sets what to monitor; it isn't the sentence that states the business intent.

  • BA policy intent statement

    Correct

    Designing a policy starts with a policy intent statement that is then mapped to configuration.

  • CA rule condition

    Incorrect

    Conditions are configuration points that the statement is mapped to.

  • DA simulation summary

    Incorrect

    Simulation results come after the policy is created.

Designing a DLP policy is mostly about defining business needs, documenting them in a policy intent statement, and then mapping those needs to policy configuration, such as what to monitor, where to monitor, conditions and actions.

Question 8 · choose 1

A DLP admin whose permissions come from role groups in the Microsoft Purview portal must also edit the Exchange mail flow rules that the messaging team uses next to DLP. Her edits to those rules fail. What should you do?

  1. AAdd her to the Compliance Data Administrator role group as well
  2. BAdd her to the Information Protection role group
  3. CAdd her to the Organization Management role group in the Microsoft Purview portal
  4. DGrant her the permissions for mail flow rules in the Exchange admin center
Show the answer and why
  • AAdd her to the Compliance Data Administrator role group as well

    Incorrect

    Purview role groups give access only to features in the Microsoft Purview portal.

  • BAdd her to the Information Protection role group

    Incorrect

    Purview role groups don't grant permissions for Exchange mail flow rules.

  • CAdd her to the Organization Management role group in the Microsoft Purview portal

    Incorrect

    Any Purview role group still covers only the features in the Microsoft Purview portal.

  • DGrant her the permissions for mail flow rules in the Exchange admin center

    Correct

    Permissions for features outside the Purview portal, such as mail flow rules, are managed in the Exchange admin center.

Managing permissions in the Microsoft Purview portal gives users access only to the compliance and governance features available within that portal. For other features, such as Exchange mail flow rules (also known as transport rules), use the Exchange admin center.

Question 9 · choose 1

At 9:00 an admin saves a new DLP policy with Turn it on right away selected. At 9:20 a user sends an email that matches the policy, and nothing happens. What explains this?

  1. AThe policy runs in simulation mode for its first day
  2. BThe policy can take effect as soon as an hour after it's created, not immediately
  3. CThe policy waits until an admin approves it on the Policies page of the Microsoft Purview portal
  4. DPolicies created after 9:00 apply only from the next day
Show the answer and why
  • AThe policy runs in simulation mode for its first day

    Incorrect

    Turn it on right away enforces the policy; simulation is a separate choice.

  • BThe policy can take effect as soon as an hour after it's created, not immediately

    Correct

    Turn it on right away runs the policy as soon as an hour after it's created.

  • CThe policy waits until an admin approves it on the Policies page of the Microsoft Purview portal

    Incorrect

    DLP policies don't need approval before they run.

  • DPolicies created after 9:00 apply only from the next day

    Incorrect

    There's no such daily schedule; the policy starts within about an hour.

When you create a DLP policy, you choose to run it in simulation mode, to turn it on right away, which runs it as soon as an hour after it's created, or to keep it off. The policy's mode decides whether its actions take effect.

Practice domain 2 →Practice all domains →