Skip to content

SAP-C03 · Domain 1: Architecture Design and Implementation Built for the Cloud · 25% of the exam

Task 1.3: Design hybrid cloud integration patterns.

Joining AWS and on-premises estates: redundant Direct Connect and VPN paths, data synchronization with DataSync, Storage Gateway and Transfer Family, integration that modernizes legacy systems, hybrid DNS with Route 53 Resolver, and hybrid compute on premises and in Local Zones.

Study it

Sample questions

Try each one before opening the answer. Every option is explained, with the AWS documentation page that proves it.

Question 1 · choose 1

A company connects its data center to a shared-services VPC through AWS Direct Connect. Thirty application VPCs in other accounts reach the shared-services VPC through a transit gateway. On-premises servers must resolve records in Route 53 private hosted zones, and instances in every application VPC must resolve names in the on-premises domain corp.example.com, which on-premises DNS servers host. The company wants one central setup with the least ongoing management. What should a solutions architect do?

  1. AConfigure the on-premises DNS servers to forward the AWS zone names to the VPC CIDR +2 address of the shared-services VPC, and set a DHCP options set in each application VPC that points to the on-premises DNS servers
  2. BRun DNS server instances in every application VPC that forward corp.example.com to the on-premises servers and the AWS zones to the VPC resolver
  3. CAssociate the private hosted zones with the on-premises network through the Direct Connect gateway so that on-premises servers query them directly
  4. DCreate Resolver inbound and outbound endpoints in the shared-services VPC, forward corp.example.com through a Resolver rule, and share the rule with the application accounts through AWS RAM
Show the answer and why
  • AConfigure the on-premises DNS servers to forward the AWS zone names to the VPC CIDR +2 address of the shared-services VPC, and set a DHCP options set in each application VPC that points to the on-premises DNS servers

    Incorrect

    AWS documents that forwarding private DNS queries from on-premises DNS servers to a VPC CIDR +2 address is not supported and can give unstable results; a Resolver inbound endpoint is the supported path.

  • BRun DNS server instances in every application VPC that forward corp.example.com to the on-premises servers and the AWS zones to the VPC resolver

    Incorrect

    Self-managed DNS servers in 30 VPCs can be made to work, but they are many servers to patch and keep available. Resolver endpoints and shared rules give the same result as a managed service.

  • CAssociate the private hosted zones with the on-premises network through the Direct Connect gateway so that on-premises servers query them directly

    Incorrect

    Private hosted zones are associated with VPCs. On-premises resolvers reach them by forwarding queries to a Resolver inbound endpoint in a VPC that the zones are associated with.

  • DCreate Resolver inbound and outbound endpoints in the shared-services VPC, forward corp.example.com through a Resolver rule, and share the rule with the application accounts through AWS RAM

    Correct

    On-premises DNS servers forward the AWS zones to the inbound endpoint, and the forwarding rule sends corp.example.com out through the outbound endpoint. Resolver rules can be shared across accounts and associated with each application VPC.

Hybrid DNS in both directions uses an inbound endpoint (on premises to AWS) and an outbound endpoint with forwarding rules (AWS to on premises). Sharing the rules with AWS RAM keeps the endpoints in one VPC for the whole organization.

Question 2 · choose 1

A manufacturer runs its cloud services on Amazon EKS. It must also run containerized vision inference on servers that it already owns next to the production lines in 12 plants. The platform team wants to manage both with the same kubectl, Helm and EKS add-on tooling, wants to stop operating Kubernetes control planes in the plants, and will not buy new hardware for this. Which solution meets these requirements?

  1. AInstall AWS Outposts racks in each plant and run EKS local clusters on them
  2. BRun the inference in AWS Local Zones close to each plant and connect the lines to them
  3. CJoin the plant servers to the existing EKS clusters as EKS Hybrid Nodes
  4. DRegister the plant servers as external instances in an Amazon ECS cluster with ECS Anywhere
Show the answer and why
  • AInstall AWS Outposts racks in each plant and run EKS local clusters on them

    Incorrect

    An Outpost is AWS compute and storage capacity that AWS installs at the customer site, which means new hardware that the company will not buy.

  • BRun the inference in AWS Local Zones close to each plant and connect the lines to them

    Incorrect

    Local Zones are AWS infrastructure placed near population centers. They do not use the servers the company owns next to the production lines.

  • CJoin the plant servers to the existing EKS clusters as EKS Hybrid Nodes

    Correct

    With EKS Hybrid Nodes, on-premises servers become nodes of an EKS cluster whose control plane AWS manages, and EKS add-ons and the usual Kubernetes tooling work across cloud and on-premises nodes.

  • DRegister the plant servers as external instances in an Amazon ECS cluster with ECS Anywhere

    Incorrect

    ECS Anywhere runs ECS tasks on customer servers, but it is not Kubernetes, so kubectl, Helm and EKS add-ons would not apply.

EKS Hybrid Nodes is the hybrid compute pattern for running Kubernetes workloads on existing on-premises or edge hardware while AWS runs the EKS control plane.

Question 3 · choose 1

Business partners upload files to a company over SFTP. The SFTP server is a single EC2 instance that writes the files to its own EBS volume, and each instance failure stops all uploads until someone rebuilds the server. The company wants to remove this single point of failure with the least operational work, and the partners must keep using SFTP. What should a solutions architect recommend?

  1. AMove to an AWS Transfer Family SFTP server that stores the files in Amazon S3
  2. BTake hourly EBS snapshots of the volume so that the server can be rebuilt faster
  3. CPut the instance in an Auto Scaling group of one so that it is replaced after a failure
  4. DAsk partners to upload with the S3 console instead of SFTP
Show the answer and why
  • AMove to an AWS Transfer Family SFTP server that stores the files in Amazon S3

    Correct

    Transfer Family is a managed service for SFTP transfers into and out of Amazon S3 or Amazon EFS, so there is no server for the company to keep running.

  • BTake hourly EBS snapshots of the volume so that the server can be rebuilt faster

    Incorrect

    Snapshots shorten a rebuild but leave one instance as the single point of failure.

  • CPut the instance in an Auto Scaling group of one so that it is replaced after a failure

    Incorrect

    A replacement instance launches from the group's launch template, so files written to the old instance's volume are not on it, and uploads stop while it launches.

  • DAsk partners to upload with the S3 console instead of SFTP

    Incorrect

    The partners must keep using SFTP, so changing their tool is not allowed.

A managed, highly available protocol endpoint removes the server rather than protecting it.

Question 4 · choose 1

Fourteen VPCs attach to a transit gateway in us-east-1. The company's data center reaches them over a single 1 Gbps dedicated AWS Direct Connect connection, with a transit virtual interface to a Direct Connect gateway that is associated with the transit gateway. Last month a fiber cut at the Direct Connect location stopped all hybrid traffic for six hours. There is no budget for another Direct Connect connection this year. During a Direct Connect failure, traffic may cross the internet at lower bandwidth if it is encrypted, and failover and failback must happen without manual steps. Which change meets these requirements?

  1. ATurn on SiteLink for the transit virtual interface so traffic can reach AWS through other Direct Connect locations
  2. BAdd a private virtual interface on the existing connection, attached to the same Direct Connect gateway as a standby path
  3. CBundle the connection with a second 1 Gbps connection at the same location into a link aggregation group
  4. DAdd a Site-to-Site VPN attachment with dynamic BGP routing to the transit gateway as a backup for the Direct Connect path
Show the answer and why
  • ATurn on SiteLink for the transit virtual interface so traffic can reach AWS through other Direct Connect locations

    Incorrect

    SiteLink connects on-premises sites to each other between Direct Connect points of presence over the AWS network. It does not give the data center a path when its only connection fails.

  • BAdd a private virtual interface on the existing connection, attached to the same Direct Connect gateway as a standby path

    Incorrect

    Virtual interfaces are what you create on a Direct Connect connection to use it. A second one still runs over the same physical connection and location, so the next fiber cut takes both down.

  • CBundle the connection with a second 1 Gbps connection at the same location into a link aggregation group

    Incorrect

    A LAG needs another dedicated connection, which the budget does not allow, and all connections in a LAG terminate at the same Direct Connect endpoint, so a failure at that location still cuts both.

  • DAdd a Site-to-Site VPN attachment with dynamic BGP routing to the transit gateway as a backup for the Direct Connect path

    Correct

    AWS describes a Site-to-Site VPN terminating on a transit gateway as a lower-cost backup for Direct Connect. For the same prefix, the transit gateway prefers routes propagated from the Direct Connect gateway over routes propagated from a VPN, so the VPN carries traffic only while Direct Connect is down.

The single point of failure is the one physical connection at one location, and the budget rules out a second connection. An IPsec VPN over the internet to the same transit gateway is the lower-cost backup AWS suggests for connections up to 1 Gbps. Because the transit gateway ranks Direct Connect gateway routes above VPN-propagated routes, traffic returns to Direct Connect on its own once it recovers. Use BGP rather than static VPN routes, because static routes would win over Direct Connect.

Question 5 · choose 1

A manufacturing application must stay in a factory for another year and uses iSCSI block volumes on an aging SAN. The company wants to stop buying SAN capacity, keep the primary data in AWS with only frequently accessed data cached locally, and take point-in-time snapshots that can later become EBS volumes when the application moves to EC2. Which solution meets these requirements?

  1. AAWS Storage Gateway Volume Gateway with cached volumes
  2. BAmazon S3 File Gateway mounted over NFS by the application servers
  3. CAWS Storage Gateway Tape Gateway with virtual tapes
  4. DAmazon FSx for Windows File Server shared to the factory over Direct Connect
Show the answer and why
  • AAWS Storage Gateway Volume Gateway with cached volumes

    Correct

    Cached volumes store data in Amazon S3, keep a local copy of frequently accessed data, present iSCSI devices to on-premises servers and support snapshots that can be restored as EBS volumes.

  • BAmazon S3 File Gateway mounted over NFS by the application servers

    Incorrect

    S3 File Gateway presents files over NFS and SMB, not iSCSI block volumes, so the application would need changes.

  • CAWS Storage Gateway Tape Gateway with virtual tapes

    Incorrect

    Tape Gateway replaces physical tape for backup software. Applications cannot run on virtual tapes as block storage.

  • DAmazon FSx for Windows File Server shared to the factory over Direct Connect

    Incorrect

    FSx for Windows File Server provides SMB file shares, not iSCSI block volumes, and every read would cross the network to AWS.

On-premises iSCSI with cloud-backed primary data and EBS-ready snapshots is Volume Gateway in cached mode.

Question 6 · choose 1

During migration assessment, a manufacturer finds a quality-control application that must process sensor data inside the factory with very low latency to machines on the shop floor. The company still wants AWS APIs and tools for it. Which option fits this workload?

  1. ARefactor it into Lambda functions in a Region near the factory
  2. BRun it on AWS Outposts installed at the factory
  3. CRehost it to EC2 in the nearest Region
  4. DRetire the application
Show the answer and why
  • ARefactor it into Lambda functions in a Region near the factory

    Incorrect

    Functions in a Region are still away from the factory floor.

  • BRun it on AWS Outposts installed at the factory

    Correct

    Outposts extends AWS infrastructure, services and APIs to customer premises for lower latency and local data processing needs.

  • CRehost it to EC2 in the nearest Region

    Incorrect

    A Region far from the factory adds network latency to the machines.

  • DRetire the application

    Incorrect

    The application is needed for quality control.

Workloads that need local processing with AWS tools fit AWS Outposts.

Practice domain 1 →Practice all domains →